Power Seat Motor: Service and Repair

Inspection

Slide Motor Limit Switch
1. Disconnect the limit switch (A) and operate the limit switch.
2. Check for continuity between the terminals.
3. Make sure that the seat operation is normal in the reverse after the maximum operation.
4. If there is an abnormality, replace the limit switch.









Reclining Motor Limit Switch
1. Disconnect the limit switch and operate the limit switch.
2. Check for continuity between the terminals.
3. Make sure that the seat operation is normal in the reverse after the maximum operation.
4. If there is an abnormality, replace the limit switch.









Power Seat Motor
1. Disconnect the connectors for each motor.








2. With the battery connected directly to the motor terminals, check if the motors run smoothly.
3. Reverse the connections and check that the motor turns in reverse.
4. If there is an abnormality, replace the motors.

[Driver]









[Passenger]









[Rear motor]










Removal

Leg support motor
1. Disconnect the negative(-) battery terminal.
2. Remove the rear right seat cushion.

3. Remove the leg support assembly (A) after disconnecting the connector (B).






Installation

Leg support motor
1. Install the leg support assembly.
2. Install the rear right seat cushion.