Camshaft Bearing Cap
Camshaft Bearing Cap
Install the bearing cap (A) and thrust bearing cap (B) with specified torque.
Tightening torque
10 mm bolts 11.8 - 13.7 N.m (1.2 - 1.4 kgf.m, 8.7 - 10.1 lb-ft)
12 mm bolts 18.6 - 22.6 N.m (1.9 - 2.3 kgf.m, 13.7 - 16.6 lb-ft)
NOTE: Do not turn the camshaft.
[RH]
[LH]
