Rear Lower Arm

Replacement

1. Remove the rear wheel & tire.

Tightening torque :
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)

2. Remove the air tube (A).




3. Disconnect the rear stabilizer link (A) & height sensor (B) from the rear lower arm by loosening the nut.








4. Loosen the cam bolt & lock nut and then remove the lower arm (A).

Tightening torque :
107.9 - 117.7N.m (11.0 - 12.0kgf.m, 79.6 - 86.8lb-ft)





Tightening torque :
137.3 - 156.9N.m (14.0 - 16.0kgf.m, 101.3 - 115.7lb-ft)




5. Disconnect the air spring from the rear lower arm by loosening the bolt (A).




6. Installation is the reverse of removal.

CAUTION:
- Take care not to twist upper and lower.
- After transportation, check the cleanliness.
- Check the cap which prevents entering foreign materials on the connector of air filling portion.
- Take care due to it is bended or defamed easily by external force.

7. Check the alignment.