Camshaft Bearing

Camshaft Bearing

Install the LH/RH camshaft bearing cap (A) and thrust bearing cap (B).

Tightening torque
1st step 5.8N.m (0.6kgf.m, 4.3lb-ft)
2nd step 9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)










CAUTION: Be sure to install the thrust bearing cap bolts and the bearing cap bolts in the correct place.

NOTE: Be careful the right, left bank, intake, exhaust side before assembling.






A : L(LH),R(RH)
B : I(Intake), None(Exhaust)
C : Journal number
D : Front mark

CAUTION: Rotate the crankshaft not to contact the valves to the pistons by making the pistons below 10mm(0.3937in.) from the top of cylinder block.