Repair Procedures

Replacement

1. Remove the Front bumper.
2. Remove the left head light.
3. Disconnect the connector (A) and then loosen the bolts (B).




4. Remove the air cleaner by disconnecting the seal ring (A), hose (B).




5. Loosen the bolts.








6. Remove the Y-connector bracket & air filter bracket by loosening the bolts.




7. Remove the mounting bolt (A), pressure hose (B), return hose (C).

Tightening torque :
45 - 60N.m (4.5 - 6.0kgf.m, 33 - 43lb-ft)




8. Installation is the reverse of the removal.