Rear Stabilizer Bar

Replacement

1. Remove the rear wheel & tire.

Tightening torque:
90 - 110N.m (9.0 - 11.0kgf.m, 65 - 80lb-ft)

2. Loosen the nuts (A).

Tightening torque:
50 - 65N.m (5.0 - 6.5kgf.m, 36 - 47lb-ft)




3. Loosen the bolts (A).

Tightening torque:
45 - 55N.m (4.5 - 5.5kgf.m, 33 - 40lb-ft)




4. Disconnect the rear stabilizer link with the stabilizer bar.

Tightening torque:
50 - 65N.m (5.0 - 6.5kgf.m, 36 - 47lb-ft)




5. Installation is the reverse of removal.

Inspection

1. Check the bushing for wear deterioration.
2. Check the all bolts.
3. Check the stabilizer bar for deformation.
4. Check the stabilizer link ball joint for damage.