Fuel Filler Neck: Service and Repair

Removal

1. Disconnect the fuel filler hose (A), the vapor tube quick-connector (B), and the ventilation tube quick-connector (C).




2. Remove the rear-LH wheel, tire, and the inner wheel house.
3. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).




4. Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolts (A).






Installation

1. Installation is reverse of removal.

Filler-neck assembly bracket installation bolt :
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)