Rear Seat Belt

Replacement

Rear Seat Belt Replacement

CAUTION:
- When installing the belt, make sure not to damaged the retractor.

1. Remove the following items first.
A. Rear seat assembly

B. Rear Pillar trim

2. After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
[LH,RH]

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




[Center]

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




3. After loosening the mounting screws, then remove the package tray trim (A).




4. After loosening the rear seat belt retractor (B) mounting bolt, then remove the rear seat belt (A).
[LH,RH]

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




[Center]

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




5. Installation is the reverse of removal.

Rear Seat Belt Buckle Replacement
1. Remove the rear seat cushion assembly.

2. Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




[RH]

Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)




3. Installation is the reverse of removal.