Timing Cover

Timing chain cover

The dowel pins on the cylinder block and holes on the timing chain cover should be used as a reference in order to assemble the timing chain cover to be in exact position.

Tightening torque:
Bolts A (M6•25) : 7.8 - 9.8N.m (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)
Bolts B (M8•28) : 18.6 - 22.5N.m (1.9 - 2.3kgf.m, 13.7 - 16.6lb-ft)
Bolt C (M8•30) : 19.6 - 24.5N.m (2.0 - 2.5kgf.m, 14.5 - 18.1lb-ft)
Bolt D (M10•40) : 39.2 - 44.1N.m (4.0 - 4.5kgf.m, 28.9 - 32.5lb-ft)
Bolts E (M10•45) : 39.2 - 44.1N.m (4.0 - 4.5kgf.m, 28.9 - 32.5lb-ft)






CAUTION: The engine starting or pressure tests should not be performed within 30 minutes after the timing chain cover was assembled.