Pressure Plate

Clutch cover bolts. Gradually tighten the bolts according to the order specified in the illustration until the specified torque is reached.

Tightening torque : 24.5 - 35.3N.m (2.5 - 3.6kgf.m, 18.1 - 26.0lb-ft)

CAUTION:
- Do not tighten a bolt once perfectly. If tightening a bolt once perfectly, it can be occurred twisting or vibration of the cover and the lift error of the pressure plate.
- Install the component with the specified torques. If not, it can be occurred clutch torque transmission error or mounting bolt loosening.