Air Door: Description and Operation

Component Parts
Air mix door control system components are:
1. Auto amp.
2. Air mix door motor (LCU)
3. In-vehicle sensor
4. Ambient sensor
5. Sunload sensor
6. Intake sensor




System Operation
The auto amplifier receives data from each Of the sensors. The amplifier sends air mix door and mode door opening angle data to the air mix door motor LCU and mode door motor LCU.
The air mix door motor and mode door motor read their respective signals according to the address signal. Opening angle indication signals received from the auto amplifier and each of the motor position sensors are compared by the LCUs in each motor with the existing decision and opening angles. Subsequently, HOT/COLD or DEFROST/VENT operation is selected. The new selection data is returned to the auto amplifier.




Air Mix Door Control Specification




COMPONENT DESCRIPTION
The air mix door motor is attached to the heater unit. It rotates so that the air mix door is opened or closed to a position set by the auto amplifier. Motor rotation is then conveyed through a shaft and the air mix door position is then fed back to the auto amplifier by PBR built-in air mix door motor.