Transmission Speed Sensor: Service and Repair

Revolution Sensor Replacement
-4WD MODEL-





1. Remove rear engine mounting member from side member while supporting A/T with transfer case with jack. Tighten rear engine mounting member to the specified torque.
2. Lower A/T with transfer case as much as possible.
3. Remove revolution sensor from A/T.
4. Reinstall any part removed.
- Always use new sealing parts.

-2WD MODEL-





- Remove revolution sensor from A/T.
- Always use new sealing parts.

Turbine Revolution Sensor Replacement





1. Remove A/T assembly.
2. Remove turbine revolution sensor from A/T assembly upper side.
3. Reinstall any part removed.
- Always use new sealing parts.