Camshaft, Engine
| Camshaft | Journal to Bearing Clearance | No.1 | 0.045 - 0.086 Millimeter (mm) |
| No.2, 3 and 4 | 0.035 - 0.076 Millimeter (mm) | ||
| Limit | 0.15 Millimeter (mm) | ||
| Inner Diameter Of Camshaft Bearing | No.1 | 26.000 - 26.021 Millimeter (mm) | |
| No.2, 3 and 4 | 23.500 - 23.521 Millimeter (mm) | ||
| Outer Diameter Of Camshaft Journal | No.1 | 25.935 - 25.955 Millimeter (mm) | |
| No.2, 3 and 4 | 23.445 - 23.465 Millimeter (mm) | ||
| Camshaft Runout [TIR] [TIR] = Total indicator reading | Less Than 0.02 Millimeter (mm) | ||
| 0.05 Millimeter (mm) | |||
| Camshaft End Play | 0.115 - 0.188 Millimeter (mm) | ||
| 0.24 Millimeter (mm) | |||
| Cam Height "A" | Intake and Exhaust | 44.465 - 44.655 Millimeter (mm) | |
| Wear Limit of Cam Height | 0.2 Millimeter (mm) | ||
| Valve Timing For diagram of letter designations refer to Engine; Specifications. | a | 232 Degrees (deg) | |
| b | 230 Degrees (deg) | ||
| c | -3 Degrees (deg) | ||
| d | 53 Degrees (deg) | ||
| e | 6 Degrees (deg) | ||
| f | 46 Degrees (deg) | ||
| Camshaft Bracket Bolts | Refer to Procedure Under Cylinder Head Assembly; Service and Repair; Removal and Installation. |