Sub-Oil Pump

Sub-oil Pump





1. Remove bolts to detach transfer motor from center case. Then remove O-ring from the transfer motor.
- Do not reuse O-ring.





2. Remove sub-oil pump mounting bolts.





3. Thread two bolts (M4 x 0.8) into the holes of sub-oil pump as shown in the figure, and pull out to remove sub-oil pump.





4. Remove oil pump gasket.
- Do not reuse gasket.





5. Remove sub-oil pump cover, outer gear, inner gear and O-ring from sub-oil pump housing.
- Do not reuse O-ring.