Scan Tool Testing and Procedures

SELF-DIAGNOSIS
CONSULT-II Setting Procedure





1. Turn ignition switch to "OFF" position.





2. Connect CONSULT-II to data link connector, which is located in instrument lower panel on driver side.
3. Start engine.





4. On CONSULT-II screen, touch "START".





5. Touch "ALL MODE 4WD" on SELECT SYSTEM screen.





6. Touch "SELF-DIAG RESULTS" on SELECT DIAG MODE screen.





7. Self-diagnostic results are displayed.

SELF-DIAGNOSTIC ITEMS





1 of 2





2 of 2