Flow of Diagnosis

1. Check the symptom and customer's requests.

2. Understand the outline of system. Refer to "System Description". Description and Operation

3. Perform the preliminary check. Refer to "Preliminary Check".
Initial Inspection and Diagnostic Overview


4. Perform the CONSULT-II / Inspection Procedure.

5. Repair or replace depending on the diagnosis result.

6. Perform the CONSULT-II / Inspection Procedure again.
Is diagnosis result OK?
If OK, GO TO step 7.
If NG, GO TO step 5.

7. Referring to Trouble diagnosis chart, repair or replace the cause of the incident. Refer to "Trouble Diagnosis Chart by Symptom". Symptom Chart

8. Does the remote keyless entry system operate normally?
If it operates normally, GO TO step 9.
If NG, GO TO step 7.

9. Inspection end.