History of Errors Mode

Confirmation/Adjustment Mode

"HISTORY OF ERRORS" MODE

Description
In this mode, historical errors of the system are displayed with the following data.
- How many times the error was detected
- The last time data when the error was detected
- The last place where the error was detected

NOTE: The number of errors can be counted up to 50 times. More than 51 times will be indicated as 50 times.
Malfunction of the GPS board (inside the display & NAVI control unit) will result in the display of incorrect time data.
When an error occurs, an incorrect position marker appears on the display. The accuracy of the display data (position marker) will be affected.







How to Perform
1. Start the engine.
2. Push both "MAP" and "D/N" switch at the same time for more than 5 seconds.
3. Touch "Confirmation/ adjustment".






4. Touch "Navigation".






5. Touch "Error history".






6. If trouble items are displayed with time count, repair/replace the system according to "HISTORY OF ERRORS" TABLE.
7. If necessary, touch error item to display the time when the error was detected and the place where the error was detected.
8. After repairing the system, erase the diagnosis memory.

History Of Errors Table 1:

History Of Errors Table 2:

NOTE: When the display & NAVI control unit must be replaced, do not erase the diagnosis memory for further inspection of malfunctions.

a. Start the engine.
b. Push both "Map" and "D/N" switches at the same time for more than 5 seconds.
c. Touch "Confirmation/ adjustment".
d. Touch "Navigation".
e. Touch "Error history".
f. Touch "Delete".
g. Touch "Yes".