Fail-Safe System

FAIL-SAFE SYSTEM







Output Failure
When the ignition switch is in the ON position, if any of the parts (indicated in the chart) move more than the specified amount within a period "T2" when no "ON" input is sent from any of the switches (indicated in the chart), or an output from the automatic drive positioner is not produced, an output failure is sensed.

Motor operation will be suspended automatically, and all automatic operations will be ineffective. (In this case, the motor will not operate manually.)


Absolving
When moving selector lever back to "P" position after having moved it to any position except "P", fail-safe operation will be canceled.