Brakes and Traction Control: Specifications

General Specifications
Front brake
Brake model AD31VC
Cylinder bore diameter x number of pistons 44.45 mm (1.7500 in) x 2
Pad length x width x thickness 132.0 x 52.5 x 11 mm (5.20 x 2.067 x 0.43 in)
Rotor outer diameter x thickness 300 x 28 mm (11.81 x 1.10 in)
Rear brake
Brake model LT30C
Cylinder bore diameter 22.23 mm (7/8 in)
Lining length x width x thickness 296 x 50 x 6.1 mm (11.65 x 1.97 x 0.240 in)
Drum inner diameter 295.0 mm (11.61 in)
Master cylinder
Bore diameter 25.40 mm (1 in)
Control valve
Valve model
2WD Proportioning valve within master cylinder
4WD Linkage type load sensing valve
Split point kPa (kg/cm2, psi) x reducing ratio
2WD 2,942 (30, 427) x 0.2
4WD (Variable) x 0.18
Brake booster
Booster model M215T
Diaphragm diameter
Primary: 230 mm (9.06 in)
Secondary: 205 mm (8.07 in)
Recommended brake fluid DOT 3

Disc Brake
Brake model AD31VC
Pad wear limit
Minimum thickness 2.0 mm (0.079 in)
Rotor repair limit
Minimum thickness 26.0 mm (1.024 in)

Drum Brake
Brake model LT30C
Lining wear limit
Minimum thickness 1.5 mm (0.059 in)
Drum repair limit
Maximum inner diameter 296.5 mm (11.67 in)
Out-of-round limit 0.03 mm (0.0012 in)

Brake Pedal
Transmission A/T
Free height "H" 175 - 185 mm (6.89 - 7.28 in)
Depressed height "D" [under force of 490 N (50 kg, 110 lbs.) with engine running]; 70 mm (2.76 in)
Clearance "C" between pedal stopper and threaded end of stop lamp switch or ASCD switch; 0.3 - 1.0 mm (0.012 - 0.039 in)
Pedal free play
At clevis 1.0 - 3.0 mm (0.039 - 0.118 in)
At pedal pad 1 - 3 mm (0.04 - 0.12 in)
*: Measured from surface of metal panel to pedal pad

Parking Brake Control
Control Type Center lever
Lever stroke [under force of 196 N (20 kg, 44 lbs.)] 6 - 8 notches
Lever stroke when warning switch comes on 1 or less notches