Air Bag Deployment (Inside Vehicle)
DEPLOYMENT OF AIR BAG MODULE AND SEAT BELT PRE-TENSIONER WHILE MOUNTED IN VEHICLEWhen disposing of a vehicle, deploy air bag module and seat belt pre-tensioners while they are mounted in vehicle.
CAUTION: When deploying air bag module or seat belt pre-tensioner, ensure vehicle is empty.
1. Disconnect battery ground cable and wait 3 minutes.
2. Disconnect air bag module and seat belt pre-tensioner connector.
3. Connect deployment tool [SST: KV99106400 (J38381)] to air bag module or seat belt pre-tensioner.
For driver air bag module, attach deployment tool adapter (SST: J38381-70) to the tool connector.
For front passenger air bag module, attach deployment tool adapter [SST: KV991065S0 (J38381-30)] to the tool connector.
For side air bag module, attach deployment tool adapter [SST: KV99109000 (J44230)] to the tool connector.
For seat belt pre-tensioner, attach deployment tool adapter [SST: KV99108900 (J38381-75)] to the tool connector.
4. Connect red clip of deployment tool to battery positive terminal and black clip to negative terminal.
5. The lamp on the right side of the tool, marked "deployment tool power", should glow green, not red.
6. Press the button on the deployment tool. The left side lamp on the tool, marked "air bag connector voltage", will illuminate and the air bag module will deploy.