High Clutch

High Clutch





COMPONENTS

DISASSEMBLY AND ASSEMBLY





Service procedures for high clutch are essentially the same as those for reverse clutch, with the following exception:





- Check of high clutch operation





- Removal and installation of return spring





- Inspection of high clutch return springs





- Inspection of high clutch drive plate
Thickness of drive plate:
Standard 1.52 -1.67 mm (0.0598 - 0.0657 inch)
Wear limit 1.40 mm (0.0551 inch)





- Measurement of clearance between retaining plate and snap ring
Specified clearance:
Standard 1.8 - 2.2 mm (0.071 - 0.087 inch)
Allowable limit 3.2 mm (0.126 inch)