Batt/Fluid Temp SEN (Fluid Temp Sens. Cir. and TCM Pwr. Source)

Description








The A/T fluid temperature sensor detects the A/T fluid temperature and sends a signal to the TOM.

CONSULT-II REFERENCE VALUE IN DATA MONITOR MODE





Remarks: Specification data are reference values.

TCM TERMINALS AND REFERENCE VALUE





Remarks: Specification data are reference values.





ON BOARD DIAGNOSIS LOGIC

DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE








After the repair, perform the following procedure to confirm the malfunction is eliminated.

With CONSULT-II
1. Start engine.
2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
3. Drive vehicle under the following conditions:
Selector lever in "D" position, vehicle speed higher than 20 km/h (12 MPH).

No Tools





1. Start engine.
2. Drive vehicle under the following conditions:
Selector lever in "D" position, vehicle speed higher than 20 km/h (12 MPH).
3. Perform self-diagnosis.





Wiring Diagram-AT-BA/FTS

Diagnostic Procedure





1 of 12





2 of 12





3 of 12





4 of 12





5 of 12





6 of 12





7 of 12





8 of 12





9 of 12





10 of 12





11 of 12





12 of 12

Component Inspection
A/T FLUID TEMPERATURE SENSOR








- Check resistance between terminals 8 and 9 while changing temperature as shown at left.