C1160

Inspection 13: When "DECEL G SEN SET" Appears on Self-Diagnosis Results Display (AWD Model)
DTC C1160

INSPECTION PROCEDURE
1. CHECK SELF DIAGNOSIS RESULTS (1)





Check self-diagnosis results.

Dose anything besides "DECEL G SEN SET" appear on self-diagnosis results display?
YES >> Inspect and repair the indicated items. Then perform self-diagnosis again.
NO >> Perform calibration of Decel G-Sensor. Then GO TO 2.

2. CHECK SELF-DIAGNOSIS RESULTS (2)
Turn ignition switch OFF and ON to erase self-diagnosis results, and perform ABS actuator and electric unit (control unit) self-diagnosis again.

Dose anything appear on self-diagnosis results display?
YES >> Replace Yaw rate/side/decal G-sensor. Then perform adjustments of neutral position and perform self-diagnosis again.
NO >> INSPECTION END.