Rear Bumper Assembly

Removal and Installation

CAUTION: Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with oil.

REMOVAL




1. Remove bumper side cover A.
2. Remove rear fillet molding assembly. Only the place connected with a rear bumper fascia is removed.




3. Remove luggage side inspection cover.
4. Remove bumper fascia special bolts from right/left rear fender.
5. Remove bumper fascia bolts from right/left rear fender.
6. Remove lower portion of bumper fascia bolts.




7. Insert driver rolled with cloth between bumper fascia and "S" type clips, and remove bumper fascia.




8. Remove bumper fascia assembly.
9. Remove bumper energy absorber.
10. Remove bumper reinforcement nuts and remove bumper reinforce assembly. Remove nuts with power tool.




11. Remove bumper nuts and remove bumper stay. Remove nuts with power tool.

INSTALLATION
Install in the reverse order of removal.