Initial Inspection and Diagnostic Overview

Preliminary Check

BASIC INSPECTION
1. CHECK ALL TIRES PRESSURES
^ Check all tires pressures.
Tire pressure: 220 kPa (2.2 kg/cm2, 32 psi)

OK or NG
OK >> GO TO 2.
NG >> Adjust tire pressure to specified value.

2. CHECK WARNING LAMP ACTIVATION
1. Check warning lamp activation.
2. Does warning lamp activate for 1 seconds when ignition switch is turned "ON".

Does warning lamp active?
YES >> GO TO 3.
NO >> Check fuse and combination meter.

3. CHECK CONNECTOR
1. Disconnect low tire pressure warning control unit harness connectors M74 and R102.
2. Check terminals for damage or loose connection.
3. Reconnect harness connector.

OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.

4. CHECK TRANSMITTER ACTIVATION TOOL
^ Check transmitter activation tool battery.

OK or NG
OK >> Carry out self-diagnosis.
NG >> Replace transmitter activation tool battery.