Daytime Light System

System Description
DAYTIME LIGHT SYSTEM turns on Daytime Light Lamps while driving. Day Light Lamps are not turned on if engine is activated with Parking Brake on. Take off Parking Brake to turn on Daytime Light Lamps. The lamps turn off when Lighting Switch is in the 2ND position or AUTO position (Head Lamp is "ON") and when Lighting Switch is in the PASSING position. (Daytime Light Lamps are not turned off only by Parking Brake itself.)

An parking brake signal and engine run or stop signal are sent to BCM (body control module) by CAN communication line, and control daytime light system.

OUTLINE
Power is supplied at all times
- through 10 A fuse [No. 19, located in the fuse block (J/B)]
- to combination meter terminal 8
- through 15 A fuse [No. 22, located in the fuse block (J/B)]
- to BCM (body control module) terminal 42
- through 50 A fusible link (letter M, located in the fuse and fusible link box)
- to BCM (body control module) terminal 55
- through 10 A fuse [No. 36, located in the fuse and fusible link box]
- to daytime relay terminal 2 and 5

When the ignition switch is in ON or START position, power is supplied
- through 10 A fuse [No. 14, located in the fuse block (J/B)]
- to combination meter terminal 7
- through 15 A fuse [No. 1, located in the fuse block (J/B)]
- to BCM (body control module) terminal 38.

Ground is supplied
- to combination meter terminal 5, 6 and 15
- through grounds M35, M45 and M85
- to BCM (body control module) terminal 49 and 52
- through grounds M35, M45 and M85.

DAYTIME LIGHT OPERATION
With the engine running, the lighting switch in the OFF or 1ST position and parking brake released, power is supplied
- through daytime light relay terminal 1
- to combination meter terminal 10
- through daytime light relay terminal 3
- to clearance lamp RH and LH terminal 1

Ground is supplied
- to combination meter terminal 5, 6 and 15
- through grounds M35, M45 and M85
- to clearance lamp RH and LH terminal 3
- through grounds E21, E50 and E51 With power and grounds supplied, the front fog lamps illuminate.

COMBINATION SWITCH READING FUNCTION
Refer to "COMBINATION SWITCH READING FUNCTION".

AUTO LIGHT OPERATION
For auto light operation, refer to "System Description" in "AUTO LIGHT SYSTEM".