Air Cleaner Housing: Service and Repair

AIR CLEANER AND AIR DUCT





Removal and Installation

REMOVAL
1. Remove engine cover with power tool.
2. Disconnect harness connector from mass air flow sensor.
3. Remove air duct (inlet), air cleaner case and mass air flow sensor assembly, air duct and resonator assembly.
^ Add marks as necessary for easier installation.

4. Remove mass air flow sensor from air cleaner case.

CAUTION: Handle mass air flow sensor with following cares.
^ Do not shock it.
^ Do not disassemble it.
^ Do not touch its sensor.

INSTALLATION
Install in the reverse order of removal paying attention to the following.
^ Align marks. Attach each joint. Screw clamps firmly.