C1144

Inspection 12: When "ST ANG SEN SIGNAL" Appears on self-Diagnosis Results Display
DTC C1144

INSPECTION PROCEDURE
1. CHECK SELF DIAGNOSIS RESULTS (1)





Check self-diagnosis results.

Dose anything besides "ST ANG SEN SIGNAL" appear on self-diagnosis results display?
YES >> Inspect and repair the indicated items. Then perform self-diagnosis again.
NO >> Perform adjustment of steering angle sensor neutral position. Then GO TO 2.

2. CHECK SELF DIAGNOSIS RESULTS (2)
Turn ignition switch OFF and ON to erase self-diagnosis results, and perform ABS actuator and electric unit (control unit) self-diagnosis again.

Dose anything appear on self-diagnosis results display?
YES >> Replace steering angle sensor. Then perform adjustment of neutral position and perform self-diagnosis again.
NO >> INSPECTION END.