Seatback Trim and Pad (Front Seat)

Removal and Installation

REMOVAL OF SEATBACK TRIM AND PAD




1. Remove the seatback garnish.




2. Remove the retainer.




3. Remove the stay securing the inner cloth.




4. Remove the headrest.
5. Remove the headrest holder.
From the back of the seatback, press the headrest holder tab of the stay pipe hole to disengage. Then pull the headrest holder up to remove.

NOTE: Before installing the headrest holder, check its orientation (front, rear, left and right).




6. Remove the heated seat connector.
7. After removing the seatback trim and pad, remove the hog rings to separate the trim, pad, and seatback heater unit.

INSTALLATION OF SEATBACK TRIM AND PAD
- Install in the reverse order of removal.