Rear Final Drive Assembly Removal and Installation

REAR FINAL DRIVE ASSEMBLY





Removal and Installation

REMOVAL
1. Remove exhaust center tube.
2. Remove rear propeller shaft front he final drive.





3. Remove rear drive shaft from final drive, then suspend it by wire etc.
4. Remove breather hose from the final drive.
5. Remove ABS rear wheel sensor.
6. Set transmission jack to rear final drive assembly, and then remove mounting bolts are nut connecting to the suspension member.

CAUTION: Do not place a transmission jack on the rear cover (aluminum case).

7. Remove the rear final drive assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION: After installation, check the final drive oil level.