Front Suspension

On-Vehicle Inspection and Service
Make sure the mounting conditions (looseness, back lash) of each component and component statues (wear, damage) are normal.

INSPECTION OF TRANSVERSE LINK BALL JOINT END PLAY
1. Set front wheels in a straight-ahead position. Do not depress brake pedal.
2. Measure axial end play by installing and moving up/down between transverse link and steering knuckle with an iron pry bar or something similar.
Axial end play: 0 mm (0 inch)

CAUTION: Be careful not to damage ball joint boot.

STRUT INSPECTION
^ Check strut for oil leakage, damage and replace if necessary.