Trunk / Liftgate: Description and Operation
System DescriptionWhen back door lock latch engaged with striker, striker is lowered by means of a motor the back door fully closed.
CLOSE OPERATION
- Half-latch is turned off when back door enters the state of a half door and back door closure control unit recognizes it.
- Back door closure control unit by which the signal is recognized operates closure motor in the close direction, and open switch is turned on.
- Close switch is turned on when back door becomes a full latch position by operating closure motor and back door closure control unit operates closure motor in an open direction.
- The operation of closure motor is stopped, and back door enters all close states when back door moves in an open direction, and open switch is turned off.
NON-OPERATION CONDITION
- When you close back door while pushing back door opener switch.
- When closing at once (within about 0.5 seconds) after back door is opened.
- When you do not close back door after back door opener switch is pushed.
OPEN OPERATION
- When passenger side door unlock and back door shuts, back door opener switch is pushed.
- Back door closure control unit receives the signal, closure motor is operated in an open direction, and back door opens.
- Closure motor is operated in the close direction and stops at a neutral position when the following conditions consist after turning on open switch.
- When you detect the thing that back door opens by half latch switch.
- When 5 seconds past without opening back door.