Rear

REAR COMBINATION LAMP

REMOVAL

Rear Fender Side




1. Remove bumper side cover A.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting bolts.
4. Pull rear combination lamp toward side of the vehicle and remove from the vehicle.

Trunk Lid Side




1. Remove back door finisher.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp mounting nuts.
4. Remove rear combination lamp from back door.
5. Remove seal packing from back door.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Install a new seal packing to the rear combination lamp.