Initialization

INITIALIZATION PROCEDURE
If the sunroof does not close or open automatically, use the following procedure to return sunroof operation to normal.
1. Push the TILT UP switch and start the tilt up operation.
2. Release the TILT UP switch once, press the TILT UP switch again. keep pushing the switch until tilt lid pops up.
3. The glass lid will move toward tilt up direction and will be stopped mechanically, and then it will be automatically fully closed. (Keep pushing the switch during this operation)
4. Release the switch again. and push the TILT UP switch within the first 6 seconds. (Keep pushing the switch)
5. After 4 seconds. the glass lid will be automatically operated in sequence of "slide open" >"slide close">"tilt up">"tilt down".
6. After the glass lid stops. release the switch after 0.5 seconds. (Keep pressing the switch during this operation)
7. If sunroof switch operates normally. this initialization is done.