C1160

Inspection 13: When "DECEL G SEN SET" Appears on Self-diagnostic Results
Display (AWD Model)
DTC C1160
INSPECTION PROCEDURE
1. CHECK SELF- DIAGNOSTIC RESULTS (1)





Check self-diagnostic results.
Does anything besides "DECEL G SEN SET" appear on self-diagnostic results display?
YES >>Inspect and repair the indicated items. Then perform self-diagnosis again.
NO >>Perform calibration of Decel G Sensor. Then GO TO 2.

2. CHECK SELF-DIAGNOSIS RESULTS (2)
Turn ignition switch OFF and ON to erase self-diagnostic results, and perform ABS actuator and electric unit (control unit) self-diagnosis again.
Does anything appear on self-diagnostic results display?
YES >>Replace Yaw rate/side/decal G sensor. Then perform adjustments of neutral position and perform self-diagnosis again.
NO >>INSPECTION END