DTC 35
Inspection 3: Transmitter - 2MALFUNCTION CODE NO. 35
1. CHECK ALL TIRE PRESSURES
^ Check all tire pressures.
Are there any tires whose pressure is 64 psi or more?
YES >> Adjust tire pressure to specified value.
NO >> GO TO 2.
2. VEHICLE DRIVING
1. Perform ID registration of all transmitters.
2. Drive at a speed of 40 km/h (25 MPH) or more for several minutes without stopping.
Check all tire pressures with CONSULT-II DATA MONITOR ITEM within 15 minutes after vehicle speed become 17 km/h (11 MPH).
>> Replace transmitter with new one if DATA MONITOR ITEM displayed 64 psi or more. Then GO TO 3.
3. ID REGISTRATION AND VEHICLE DRIVING
1. Perform ID registration of all transmitters.
2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes. Then check all tire pressures with CONSULT-II DATA MONITOR ITEM within 5 minutes.
Does DATA MONITOR ITEM display tire pressure as normal without any warning lamp?
YES >> INSPECTION END
NO >> GO TO the applicable to DTC.