Vehicle Security (Theft Warning) System

1. Turn ignition switch OFF.




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.




3. Turn ignition switch ON.
4. Touch "START (NISSAN BASED VHCL)".




5. Touch "BCM".
If "BCM" is not indicated, go to GI-40, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




6. Touch "THEFT ALM".




7. Select diagnosis mode. "DATA MONITOR", "ACTIVE TEST" AND "WORK SUPPORT"