Active Test

ACTIVE TEST

CAUTION:
- Never perform the active test while driving.
- Active test cannot be started while ICC system warning indicator illuminates.

1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen. Refer to "CONSULT-II BASIC OPERATION".




2. Touch any of "ICC BUZZER 1", "METER LAMP", "STOP LAMP" and "BOOSTER SOL/V 3" on selection screen.
3. Touch necessary item and "START".
4. Active test screen will be shown.

ICC BUZZER 1




- Touch "ON" and "OFF" to check that ICC warning chime operates as in the following chart.

METER LAMP




- Start the engine.
- Touch "ON" and "OFF" to check that ICC system display operates as in the following chart.

STOP LAMP




- Touch "ON" and "OFF" to check that stop lamp operates as in the following chart.

BOOSTER SOL/V 3







- Touch any of "MODE 1", "MODE 2", "MODE 3" to check that following operation condition is caused by operating monitor and brake pedal.
- "START" is displayed 10 seconds after operation start. (Active test is completed.)