Radiator Cooling Fan: Service and Repair

COOLING FAN





Components

Removal and Installation
REMOVAL
1. Remove air duct (inlet), power duct and air cleaner case assembly.
2. Disconnect harness connector from fan motors, and move harness to aside.
3. Remove radiator cooling fan assembly.

CAUTION: Be careful not to damage or scratch on radiator core.

INSTALLATION
Install in the reverse order of removal.

INSPECTION AFTER INSTALLATION
Make sure that fan motors operate normally.

NOTE: Cooling fans are controlled by ECM. For details, refer to, "DTC P1217 ENGINE OVER TEMPERATURE" .

Disassembly and Assembly
DISASSEMBLY
1. Remove cooling fans (RH and LH) from fan motors.
2. Remove fan motors from fan shroud.

INSPECTION AFTER DISASSEMBLY
Cooling Fan
Inspect cooling fan for crack or unusual bend.
^ If anything is found, replace cooling fan.

ASSEMBLY
Assemble in the reverse order of disassembly.

CAUTION: Cooling fans and fan motors are different between RH and LH. Be careful not to misassemble them.