Fog/Driving Lamp Bulb: Service and Repair

Bulb Replacement




1. Remove left side fender protector (front). Refer to "Removal and Installation", "Removal and Installation" in "EI" section.
2. Disconnect fog lamp connector.
3. Turn bulb socket counterclockwise and unlock it.

Fog lamp : 12 V - 51 W (HB4 halogen)

CAUTION:
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Never touch bulb by hand while it is lit or right after being turned off. Burning may result.
- Never leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. May affect the performance of fog lamp. When replacing bulb, be sure to replace it with new one.