Alternator and Power Steering Oil Pump Belt
ALTERNATOR AND POWER STEERING OIL PUMP BELT1. Remove front engine undercover with power tool.
2. Loosen idler pulley lock nut (A) and adjust tension by turning adjusting bolt (B). For the specified belt tension, refer to, "Checking Drive Belts".
3. Tighten nut (A).
: 34.8 Nm (3.5 kgf-cm, 26 ft. lbs.)
A/C COMPRESSOR BELT
1. Remove front engine undercover with power tool.
2. Loosen idler pulley lock nut (c) and adjust tension by turning adjusting bolt (D).
- For the specified belt tension, refer to, "Checking Drive Belts".
3. Tighten nut (c).
: 34.8 Nm (3.5 kgf-cm, 26 ft. lbs.)