Cannot Be Changed to Manual Mode

Cannot Be Changed to Manual Mode

SYMPTOM: Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE
1. CHECK MANUAL MODE SWITCH
Check the manual mode switch. Refer to "DTC P1815 MANUAL MODE SWITCH".
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.

2. CHECK SELF-DIAGNOSIS RESULTS
Perform self-diagnosis. Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", AT-104, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". CONSULT Inspection Procedure and TCM Self-Diagnostic Procedure (No Tools)
Is any malfunction detected by self-diagnostic results?
YES >> Check the malfunctioning system. Refer to "SELF-DIAGNOSTIC RESULT MODE", "Judgement Self-Diagnosis Code".
NO >> INSPECTION END