Engine Cannot Be Started In "P" or "N" Position
Engine Cannot Be Started In "P" or "N" PositionSYMPTOM:
Engine cannot be started with selector lever in "P" or "N" position.
Engine can be started with selector lever in "D" or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", AT-104, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". CONSULT Inspection Procedure and TCM Self-Diagnostic Procedure (No Tools)
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to "DTC P0705 PARK/NEUTRAL POSITION SWITCH".
NO >> GO TO 2.
2. CHECK CONTROL LINKAGE
Check the control linkage.
Refer to "Checking of A/T Position".
OK or NG
OK >> GO TO 3.
NG >> Adjust control linkage. Refer to "Adjustment of A/T Position".
3. CHECK STARTING SYSTEM
Check starting system. Refer to "STARTING SYSTEM".
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.