Malfunction Indicator Lamp (MIL)

DESCRIPTION





The MIL is located on the instrument panel.
1. he MIL will light up when the ignition switch is turned ON with out the engine running. This is a bulb check.
^ If the MIL does not light up, refer to "WARNING LAMPS" or see "MIL AND DATA LINK CONNECTOR" (for VQ35DE) or "MIL AND DATA LINK CONNECTOR" (for VK45DE).
2. When the engine is started, the MIL should go off. If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.