Camshaft Bearing

5. Tighten camshaft bracket bolts in the following steps, in numerical order as shown.
a. Tighten No. 7 to 10 in numerical order as shown.
1.96 Nm (0.20 kgf-cm, 1 ft. lbs.)
b. Tighten No. 1 to 6 in numerical order as shown.
1.96 Nm (0.20 kgf-cm, 1 ft. lbs.)
c. Tighten No. 1 to 10 in numerical order as shown.
5.88 Nm (0.60 kgf-cm, 4 ft. lbs.)
d. Tighten No. 1 to 10 in numerical order as shown.
10.4 Nm (1.1 kgf-cm, 8 ft. lbs.)

CAUTION: After tightening mounting bolts of camshaft brackets (No. 1), be sure to wipe off excessive liquid gasket from the parts list below.
^ Mating surface of rocker cover
^ Mating surface of rear timing chain case