Stabilizer Bar
Part 1:
Part 2:
Removal and Installation
REMOVAL
1. Remove center muffler from vehicle. Refer to Removal and Installation.
2. Remove fixing bolts and remove stabilizer connecting rod mount bracket from suspension arm with power tool.
3. Remove lower side fixing nut on stabilizer connecting rod and remove stabilizer connecting rod from stabilizer bar with power tool.
4. Remove fixing nuts on stabilizer clamps and remove stabilizer from vehicle with power tool.
INSPECTION AFTER REMOVAL
Check stabilizer bar, stabilizer bushings, stabilizer clamps, stabilizer connecting rod, stabilizer connecting rod mounting bracket for any deformation, cracks or damage. Replace if necessary.
INSTALLATION
^ Refer to Components for tightening torque. Install in the reverse order of removal.
NOTE: Refer to component parts location and do not reuse nonreusable parts.
^ Stabilizer bar uses pillow ball type connecting rod, position ball joint with case on pillow ball head parallel to stabilizer bar.