Lock-Up Is Not Released

Lock-Up Is Not Released

SYMPTOM: The lock-up condition cannot be canceled even after releasing the accelerator pedal.

DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis. Refer to AT-94, "SELF-DIAGNOSTIC RESULT MODE", AT-104, "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS)". CONSULT Inspection Procedure and TCM Self-Diagnostic Procedure (No Tools)
Is any malfunction detected by self-diagnostic results?
YES >> Check the malfunctioning system. Refer to "SELF-DIAGNOSTIC RESULT MODE", "Judgement Self-Diagnosis Code".
NO >> GO TO 2.

2. CHECK SYMPTOM
Check again. Refer to "Cruise Test - Part 1".
OK or NG
OK >> INSPECTION END
NG >> GO TO 3.

3. CHECK TCM
1. Check TCM input/output signals. Refer to "TCM Input/Output Signal Reference Values".
2. If NG, recheck A/T assembly harness connector terminals for damage or loose connection with harness connector.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.