Reading and Clearing Diagnostic Trouble Codes

DESCRIPTION
During driving, the low tire pressure warning system receives the signal transmitted from the transmitter installed in each wheel, and gives alarms when the tire pressure becomes low. The control unit (BCM) of this system has pressure judgement and trouble diagnosis functions.

LOW TIRE PRESSURE WARNING LAMP DIAGNOSTIC CHART

Part 1:

Part 2:

NOTE: If more than one wheel transmitter is NOT activated, the warning lamp blinking patterns for those wheels will combine. (Example: one blink/OFF/three blinks = Rear LH and Rear RH transmitters are not activated.)

CONSULT-II
CONSULT-II Main Function





In a diagnosis function (main function), there are WORK SUPPORT, SELF-DIAGNOSTIC RESULTS, DATA MONITOR, ACTIVE TEST.

WORK SUPPORT MODE
Operation Procedure





1. Touch necessary test item.
2. The Work support screen will be displayed, so perform the following test.

Test Item





^ ID Read
^ ID Regist

ID Read
The registered ID number is displayed.

ID Regist
Refer to ID Registration Procedure.

SELF-DIAGNOSTIC RESULTS MODE

Part 1:

Part 2:

NOTE: Before performing the self-diagnosis, be sure to register the ID, or else the actual malfunction location may be different from that displayed on CONSULT-II.

DATA MONITOR MODE





NOTE: Before performing the self-diagnosis, be sure to register the ID, or else the actual malfunction location may be different from that displayed on CONSULT-II.

ACTIVE TEST MODE

NOTE: Before performing the self-diagnosis, be sure to register the ID, or else the actual malfunction location may be different from that displayed on CONSULT-II.

Operation Procedure





1. Touch necessary test item.
2. The Active Test screen will be displayed, so perform the following test.

Test Item
^ Flasher
^ Horn
^ Warning lamp
^ ID regist warning
^ Flat tire warning

Flasher





Touch LH and RH on the display, and then check to make sure that each turn signal lamp turns on.

Horn





Touch LH and RH on the display, and then check to make sure that the horn sounds.

Warning Lamp





Touch LH and RH on the display, and then check to make sure that the warning lamp turns on.

ID Regist Warning





Touch LH and RH on the display, and then check to make sure that the buzzer sounds or the warning lamp turns on.

Flat Tire Warning





Touch LH and RH on the display, and then check to make sure that the buzzer sounds or the warning lamp turns on.