Removal and Installation
Removal and InstallationREMOVAL
1. Disconnect the battery cable from the negative terminal or remove power fuse.
2. Remove front bumper. Refer to "Removal and Installation" in "EI" section.
3. Remove headlamp mounting bolts and nut.
4. Remove plastics bumper bracket, then pull headlamp toward vehicle front, disconnect connector, and remove headlamp.
INSTALLATION
Installation is the reverse order of removal.
Headlamp mounting bolt : 6.1 Nm (0.62 kg-m, 54 in-lb)
NOTE: After installation, perform aiming adjustment. Refer to LT-35, "Aiming Adjustment". Adjustments