Disassembly and Assembly

Disassembly and Assembly
Components (Without Automatic Drive Positioner)
DISASSEMBLY





^ Remove all parts from jacket tube assembly.
^ When remove tilt lever, perform as shown in the figure.





^ When remove telescopic lever, perform as shown in the figure.

ASSEMBLY
Refer to Components (Without Automatic Drive Positioner) for tightening torque. Install in the reverse order of disassembly.

Part 1:

Part 2:

Components (With Automatic Drive Positioner)

DISASSEMBLY
Disassemble the parts from jacket tube. The parts to be disassembled are shown in the figure.

ASSEMBLY
Refer to Components (With Automatic Drive Positioner) for tightening torque. Install in the reverse order of disassembly.